CAME FAST Series - Standard Installation; Tools and Materials

5
The data and information shown in this manual may be changed by CAME cancelli automatici s.p.a. at any time without prior warning.
ENGLISH
Make sure you have all the tools and materials you will need for the installation at hand to work in total safety and com-
pliance with the current standards and regulations. The following figure illustrates the minimum equipment needed by the
installer.
5.4 Tools and materials
1) Automation
2) Control panel
3) Frequency card
4) Antenna
5) Flashing light
6) Selector switch
7) Photocells
8) Electric cable junction box
9) Mechanical stops
10)Transmitter
5.3 Standard installation
,
/
#+
5.,/#+
,
/
#
+
5
.,
/#
+
#!-%
1
4
5
6
7
3
2
10
8
9