CAME KR300 - Opening Limit-Switch and Inward Bracing; Setting Opening Limit-Switch Points; Inward Brace Fastening

󱤨
󱤨
A
B
p. 10 - Manual FA01158 -EN - 02/2023 - © CAME S.p.A. - Translated original instructions
INWARD OPENING CONNECTIONS AND INSTALLING
Fastening the braces
Measure quotas A and B (while respecting the quotas shown on the table) to establish the point where the post brace joined with non-supplied
supplementary brace will be fastened.
Application dimension (mm)
KR300 - KR302 - KR310
Leaf opening arc (°) A B E
90° 130 130 910
KR510 - KR512
Leaf opening arc (°) A B E
90° 200 200 1310
For opening
Release the gearmotor.
Reach the wanted leaf-opening point.
Send a (2-3) opening command and turn the threaded rod 󱤨 clockwise until the microswitch activates to stop the gearmotor.
 Leave the nut loose on the threaded rod.
Do the same procedure for the right-side gearmotor.