CAME KR300 - Final Brace and Gearmotor Attachment; Supplementary Brace Attachment; Gearmotor to Braces Attachment

E
p. 11 - Manual FA01158 -EN - 02/2023 - © CAME S.p.A. - Translated original instructions
Open the gate to 90°, weld or fasten the gate brace using suitable bolts (while respecting quota E as shown in the table).
Assemble and weld the supplementary brace to the post brace. Fasten the supplementary brace to the post.
Fasten the gearmotor to the braces by using the supplied nuts and bolts.