CAME KR300 - Final Operations and Manual Release; Final Installation Operations; Releasing the Gearmotor

90°
90°
p. 13 - Manual FA01158 -EN - 02/2023 - © CAME S.p.A. - Translated original instructions
RELEASING
LOCKING
RELEASING THE GEARMOTOR
⚠
This procedure must be done with the main power cut o .
⚠
The gearmotor's manual release may cause unwanted movement of the gate, if the latter has any mechanical issues or if it is not balanced.
FINAL OPERATIONS
Proceed with the fi nal steps, only once you have completed all connections and made the gate operational.
Fit the cover and fasten the screw.