CAME KR300 - Control Panel and Limit-Switch Finalization; Control Panel Wiring Recap; Limit-Switch Adjustment Recap

ZA3N - ZA3P
W V U W V U
󱤪
󱤪
󱤨
󱤨
p. 12 - Manual FA01158 -EN - 02/2023 - © CAME S.p.A. - Translated original instructions
Establishing the limit-switch points
Carefully follow the previous description.
➡ To establish the opening limit-switch point, use the threaded rod 󱤪.
To establish the closing limit-switch point, use the threaded rod 󱤨.
230 V AC gearmotor fi tted on the left (inside
view), with delayed opening.
230 V AC gearmotor fi tted on the right (inside
view), with delayed closing.
Connecting to the control panel
⚠
Warning! Before working on the control panel, cut off the main current supply and, if present, remove any batteries.