1.5 09/2010
© CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Function: Cancelling the number of passages
Cancelling the number of passages (entrance-exit) made by the turnstile
Function 8: Setting the maximum number of passages.
Setting the number of maximum passages allowed in the direction established by the “F-13” function.
From 1 to 65,000 passages or leave unlimited passages “OFF”.
Note: the number appearing on the display shows user presence at the entrance at that moment.
Function 9: setting the time and date.
Note: press the ENTER button until the datum you wish to change appears then press the <> buttons to increase or decrease the
datum, press ENTER until the automatic setting choice for daylight savings time (ON) or only set the GMT (OFF) time for the entire
year, confirm by pressing ENTER again.
Function 10: intrusion alarm Buzzer
Activating the buzzer in case of intrusion of deactivation. The activation time can be set between 1” and 60”.
Function 11: StandAlone or Online mode.
Stand-Alone (the turnstile works automatically – OFF) or On-Line (the turnstile is connected to and managed by the RBM84
access control system – ON).
Function 12: Periferal device number.
Assign to each turnstile (if more than one) a peripheral number (e.g. access control, etc.)
minutes
Hour
Days of the week, e.g.: 1 =
Monday, 2 = Tuesday, etc.
Day of the monthMonthyear