CAME U 1400

Installation type:
1) Groupe moteur
gauche
2) Groupe moteur droit
3) Armoire de commande
4) Récepteur radio
5) Photocellule de
sécurité
6) Sélecteur à clé
7) Clignotant de
mouvement
8) Nantenne de réception
9) Colonne pour
photocellule
10) Emetteur radio
Standard installation :
1) Left-hand motor unit
2) Right-hand motor unit
3) Control panel
4) Radio reveicer
5) Safety photocell
6) Key-operated selector
switch
7) Flashing light
8) Receiving antenna
9) Photocell column
10) Radio transmitter
Impianto tipo:
1) Gruppo motore sx
2) Gruppo motore dx
3) Quadro comando
4) Ricevitore radio
5) Fotocellula di sicurez-
za
6) Selettore a chiave
7) Lampeggiatore di movi-
mento
8) Antenna di ricezione
9) Colonnina per fotocel-
lula
10) Trasmettitore radio
Instalación tipo:
1) Conjunto motor izq.
2) Conjunto motor der.
3) Cuadro de mandos
4) Radiorreceptor
5) Fotocélula de
seguridad
6) Selèctor con llave
7) Lámpara intermitente
8) Antena de recepción
9) Columna para
fotocélula
10) Transmisor
Standard montage:
1) Motoreinheit, links
2) Motoreinheit, rechts
3) Steuergerät
4) Funkempfänger
5) Sicherheits-Photozelle
6) Schlüsselschalter
7) Blinkmeldeleuchte
8) Empfangsantenne
9) Lichtschrankeensäule
10) Handsender
Automazione esterna per cancelli a battente con motoriduttore KRONO
External automatic opening system for wing gates with KRONO gearmotor
Automatisme axtérieur pour portails à battant avec motoréducteur KRONO
Externe Automatik für Flügeltore mit KRONO getriebemotor
Automatizacion exterior para puertas batientes con motorreductor KRONO
11
6
5
4 x 1,5
2 x 1
4 x 1,5
2 x 1,5
T RG 58
3 x 1,5
230 V
7
8
3
4
1
2
4 x 1 - RX
2 x 1 - TX
4 x 1 - RX
9
9
10
2 x 1 - TX
Documentazione
Tecnica
S59
rev. 0.1
del 03/00
© CAME
CANCELLI
AUTOMATICI
119DS59
SET
COMPLETE
U 1400

CAME U 1400 Specifications

General

Brand	CAME
Model	U 1400
Category	Gate Opener
Language	English

Summary

General Specifications

Product Description

External automating opening system for wing gates; compliant with safety standards (UNI 8612), IP54 rated; guaranteed 12 months.

Operational Limits

Door height up to 3 meters; maximum opening of wing: 120°; values for residential use.

Available Versions

Models include KR 300 S/D (left/right) and KR 310 S/D (with end stops).

Accessories

KR001: Personalised key lock.

Technical Characteristics

Technical Data

Table 1 details motor specifications: protection, weight, power supply, current, power, duty cycle, thrust, travel time, capacitor.

Usage Limits

Table 2 specifies gate wing width vs. weight capacity (e.g., 2.00m width for 800 Kg).

External Dimensions

Diagram and measurements showing overall size and stroke length.

General Checks and Safety

Gate Structure Checks

Verify gate structure robustness, hinge lubrication, and critical distance C compliance.

Installation and Assembly

Bracket Installation

Fixing rear and front brackets according to specific measurements (A, B) and alignment.

Gear Motor Mounting

Installing the gear motor onto the prepared brackets.

Mechanical Doorstop Installation

Install a mechanical stop at closed positions to prevent over-travel.

Electrical Connections and Adjustments

Gear Motor Wiring

Connecting electrical cables to the gear motor terminal block as per diagram.

Limit Switch Adjustment

Adjusting opening (screw A) and closing (screw C) limit switches.

Gear Release Mechanism

Manual Release Procedure

Using the key and lever to manually unlock and move the gate.

Periodic Maintenance

Maintenance Tasks

Lubricating nylon parts, checking screws, and verifying cable integrity.