1- 05/2015- © Came S.p.A. - The manual's contents may be edited at any time without notice.
LEGEND
This symbol shows which parts to read carefully.
⚠
This symbol shows which parts describe safety issues
☞
This symbol shows which parts to tell users about.
REFERENCE REGULATIONS
Came S.p.A. is certified for the ISO 9001 quality and ISO 14001 environmental management systems.
This product complies with the current regulations mentioned in the declaration of conformity.
DESCRIPTION
This product complies with current safety standards.
The operator is made up of a gearmotor, a control board with transformer, a slide guide with either a belt or
chain transmission system, a transmission arm and an ABS casing with display for keypad programming and
a LED courtesy light.
Intended use
The V6000 operator is designed to power overhead and sectional garage doors used in homes and
apartment buildings.
Any installation and/or use other than that specified in this manual is forbidden.
Limits to use
Type V6000
Door surface area (m
2
)9
Maximum height of counterbalanced overhead doors (m) 2.4
Maximum height of spring-balanced overhead doors (m) 3.25
Maximum height of sectional doors (m) 3.20
Technical data
Type V6000
Protection rating (IP) 40
Power supply (V - 50/60 Hz) 230 AC
Power supply motor (V) 24 DC
Stand-by absorption (W) 7
Maximum power of the accessories (W) 35
Nominal power (W) 100
Opening speed (m/min) 6
Traction force (N) 600
Operating temperature (°C) -20 ÷ +55
Insulation class
Weight (kg) 4.9
To Next Page
Loading...
