Cameron LEFM 200 - Display Notes

LEFM 200 Modbus User Manual IB0147 Rev. 8
December 2010 Page 23 Section 3
3.7 Display Notes
Display Field Width and Decimal Precision
The field width variable defines the displayed field width and the decimal precision variable
defines the number of characters to the right of the decimal point. For example, if the field width
is 7 and the decimal precision is 4, then the field will look like:
XX.XXXX
(7 total characters, including the decimal point and 4 to the right of the decimal point).
The width variables are:
Flow field width (776) – Flow display
The decimal variables are:
Flow decimal precision (777) – Flow display
Display Units
The flow display text is for display text only – Units Conversion discussed previously scales the
flow. The following choices select the display text:
0 – “” (no text)
1 – “CFS”
2 – “CFM”
3 – “CMS”
4 – “GPM”
5 – “BPH”
6 – “BPD”
7 – “MGD”
8 – “CMH”