8
Figure 2: Venting Arrangement
7.1 OUTDOOR VENTING
When fitted with the factory supplied rain shield and UL approved vent cap, the MicoFlame is self-venting.
The following applies to outdoor installations:
1. Use only factory supplied rain shields.
2. Periodically check to ensure that air intake and vent cap are not obstructed.
3. Locate boiler at least 3 feet away from any overhang.
4. Locate boiler at least ten feet from building air intake.
5. Avoid installation in areas where runoff from adjacent building can spill onto boiler.
To Next Page
Loading...
