EasyManua.ls Logo

Candy CY-09QBIN - Page 148

Candy CY-09QBIN
288 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
EN
English
Operation
Wi-Fi function description
Conguration method
Scan the QR code below to download “hOn” APP. Other Download
options: Please search hOn APP on:
●App Store (IOS)
●Google Play (Android)
●Huawei AppGallery (Android)
After App Download, please register,
connect the air conditioner and enjoy using
hOn to manage your device. Please refer
to the HELP section inside the APP for
more details about how to register, connect
the unit, and other operations
The system architecture diagram
The application environment
Smart mobile phone and wireless router are necessary for the
application.
Wireless router must be able to connect to the Internet.
Smart mobile phone requires IOS or Android system:
IOS system
must support IOS 9.0 or above
Android system
must support Android 5.0 or above
Control
Interaction
Remind
Query
Service
APP
Cloud service
Router
Haier Smart AC
Functional description:
the purpose of this function is to clean the evaporator.
Entry and exit
Press
button to enter this function, then the display will
show "CL" on the panel of the indoor unit and on the remote
controller.Maximum running time in this function is no more than 21
minutes. This function will exit automatically with the " Pi " sound
twice, then the unit return to original state. During SELF CLEAN
operation, pressing the button repeatedly will not exit the process.
Press ON/OFF button to exit this mode.
NOTE:
1.This function is invalid in TIMER / SLEEP mode.
2.After this mode starts, the air volume may reduce, have no
airow, or even cold airow blowing.
3.It is normal if the unit makes some sound when the air expands
with heat and contracts with cold.
4.The “CL” display time may last di󰀨erently on the remote controller
and panel.
5.If the outside ambient temperature is below zero, error code “F25
“may be show up during self-cleaning operation, which is normal
protection, please turn o󰀨 the power and restart after 10 seconds.
6.The best condition to run this mode is temperature is between
20ºC~27ºC , the humidity is between 35%~60% indoors, and the
temperature is between 25ºC~38ºC (cooling season)outdoors.
7.It is hard for the air to frost if the air is too dry (humidity﹤20%).
The condensate water may increase if the humidity of the air is too
high (humidity>70%) .
SELF-CLEAN Operation

Table of Contents

Related product manuals