Candy FCG962DX - Connecting to the Gas Supply

1313
CONNECTING TO THE GAS SUPPLY
The gas connection tting (g. 2.2) is made up of:
• the oating nut;
• the gasket.
The gas connection must be carried out by an authorised person according to the
relevant local standards.
• If using a exible hose, make sure it does not come into contact with moving parts.
• The supplied gasket guarantees a good seal for the gas connection. We recommend
that you replace the gasket on the slightest sign of wear, deformation or imperfection.
• After connecting to the gas mains, check that the couplings are correctly sealed,
using soapy solution, but never a naked ame.
Fig. 2.1