Candy FCG962DX - Replacing the Oven Lights

4444
REPLACING THE OVEN LIGHTS
(NOTE: DEPENDING ON YOUR MODEL, YOUR OVEN MAY ONLY HAVE SOME OF
THESE LIGHTS)
WARNING: Ensure the appliance is switched o󰀨 before replacing the lamp to avoid
the possibility of electric shock.
• Let the oven cavity and the heating elements to cool down.
• Switch o󰀨 the electrical supply.
• Remove the protective cover (gs. 4.4a - 4.4b).
• Replace the halogen lamp with a new one suitable for high temperatures having the
following specications: 220-240 V ac and same power (check watt power as stamped
in the bulb itself) of the replaced lamp.
 IMPORTANT WARNING: Never replace the lamp with bare hands; contamination
from your ngers can cause premature failure. Always use a clean cloth or
gloves.
• Ret the protective cover.
NOTE: Oven bulb replacement is not covered by your guarantee.
WRONG
CORRECT
WRONG
CORRECT
Fig. 4.4b
Fig. 4.4a
The intended purpose of the lamps, tted on this appliance, is to illuminate the oven cavity
and thus help the user to better monitor the food while cooking. These lamps are not
suitable for other usage (e.g. environments lighting).
This product contains more than one light source of energy e󰀩ciency class G.