Candy FCG962DX - Setting the Clock; Using the Timer

4040
SETTING THE CLOCK
When rst connected, or after a power failure, the digits will ash on the display.
To set the clock, touch the “ MODE ” key, for more than 2 seconds, and then the “ ” or
“ ” keys.
To set the clock, with the appliance already connected, touch the “ ” and “ ” keys
simultaneously (for more than 2 seconds), then “ ” or “ ” keys.
USING THE TIMER
You can use the timer at any time, even when the oven is not in use.
The timer does not turn the oven o󰀨.
The timer can be set for up to 23 hours and 59 minutes.
• To set the timer, touch the “ MODE ” key for more than 2 seconds (the “ ” symbol
ashes), than the “ ” or “ ” keys.
• After about 8 seconds an acoustic signal (“beep”) will sound conrming the regulation
(“ ” symbol steady illuminated).
• To check the remaining time touch the “ MODE ” key for more than 2 seconds. If the
remaining time is more than a minute the display will show hours and minutes; if less
than a minute the display will show seconds.
• When the time is up, the timer will beep. Touch the “ MODE ” key , for more then 2
seconds, to turn it o󰀨; or press the “ ” or “ ” key to stop the beep and than the
“ MODE ” key, for more than 2 seconds, to deactivate the “ ” symbol ashing on
the display.
• Turn o󰀨 the oven manually (thermostat knob in the o󰀨 position) if the cooking has been
completed.
SETTING THE TIMER VOLUME
You can select from three volume levels.
• Touch the “ ” and “ ” keys simultaneously for more than 2 seconds.
• Touch the “ MODE ” key; you can read on the display the current timer volume (“ton1”,
“ton2” or “ton3”).
• Touch the “ ” key to listen or change the timer volume.
• Timer volume activated: the last displayed.
• After about 8 seconds an acoustic signal (“beep”) will sound conrming the volume
setting; then the time of day will be displayed.