Candy FCG962DX - Fan Motor

3232
COOKING WITH GAS OVEN
Once the oven gas burner has been lit,
close the oven door and preheat the oven
for at least 15 minutes. Preheating should
always be carried out with the oven empty:
remove the trays and racks from the oven
cavity.
Once the oven has been preheated, insert
the food you intend to cook.
Check the cooking time and turn o󰀨 the
oven 5 minutes before the theoretical time
to recuperate the stored heat.
FAN MOTOR (Only for the “fan
assisted” models - models having also
the position or )
The fan motor is designed to distribute
throughout the oven the heat generated by
the oven gas burner.
The fan motor can also be used without
the oven gas burner (without heating) to
defrost frozen foods.
The fan is controlled by a knob (g. 2.6a,
2.6b or 2,6c).
• To operate the fan motor turn the knob
indicated in g. 2.6a, 2.6b or 2,6c to
or position. (In the position
also the rotisserie motor is operating).
• To switch it o󰀨 turn the knob to the o󰀨
position (“O” or “0”).
IMPORTANT: When using the fan motor
together with the oven gas burner, switch
on the fan only after the ignition of the gas
burner.
Fig. 2.6a
Only for the “fan assisted” models -
models having also the position .
NOTES: The knob and symbols may vary.
The symbols may be printed on the knob
itself.
Fig. 2.6b
Fig. 2.6c
Only for the “fan assisted” models -
models having also the position .
Only for the “fan assisted” models - models
having also the position or .
NOTES: The knob and symbols may vary.
The symbols may be printed on the knob
itself.
NOTES: The knob and symbols may vary.
The symbols may be printed on the knob
itself.