4343
OVEN FITTING OUT
• Assemble the wire racks to the oven walls using the 2 screws (g. 4.1).
• Slide in, on the guides, the shelf and the tray (g. 4.2).
The shelf must be tted so that the safety catch, which stops it sliding out, faces the
inside of the oven.
Some models only: The shelf must be tted so that the safety catch, which stops it
sliding out, faces the inside of the oven; the guard rail shall be at the back.
• To dismantle, operate in reverse order.
Stop notch
Fig. 4.2
Fig. 4.3
Fig. 4.1
Guard rail
(Some models
only)
GREASE FILTER - FAN ASSISTED
OVENS (SOME MODELS ONLY)
• A special screen is provided at the
back of the oven to catch grease
particles, mainly when meat is being
roasted (g. 4.3).
• When baking pastry etc. this lter
should be removed.
• Slide in the grease lter on the back of
the oven as in g. 4.3.
• Clean the lter after any cooking!
The grease lter can be removed
for cleaning and should be washed
regularly in hot soapy water.
Always clean the lter after cooking as
any solid residues on it might adversely
aect the oven performance.
• Always dry the lter properly before
tting it back into the oven.
To Next Page
Loading...
