EasyManua.ls Logo

Canon 300X - Custom Functions - AF and Flash Settings; Custom Function 02-06 Configuration

Canon 300X
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
5Setting Custom Functions
C.Fn-02 AF point selection method
0 : Press AF point selection button, then press the cross keys.
1 : Press the shutter button halfway, then press cross keys.
Effective during the <˜> and <> active times.
Pressing the <3> button switches to automatic AF point
selection.
C.Fn-05
Shutter curtain sync with built-in flash and EX-series Speedlite
0 : 1st-curtain sync
1 : 2nd-curtain sync
With second-curtain sync and a slow shutter speed, you can
create a light trail following a moving subject. The flash fires
right before the shutter closes. Second-curtain sync can be set
even with EOS-dedicated Speedlites which cannot switch the
shutter curtain synchronization. The Speedlite with a shutter
curtain synchronization setting will override the camera’s
setting.
When you press the shutter button completely, a preflash will be
fired for flash exposure control.
C.Fn-06 Flash sync speed in Av mode
0 : Auto
1 : 1/125 sec. (fixed)
When you use flash in the aperture-priority mode (Av), the flash
sync speed will be fixed at 1/125 sec. This prevents the camera
from setting a slow sync speed in low-light conditions.
C.Fn-03
Switch to center AF point with AF point selection button
0 : Disabled
1 : Enabled
C.Fn-04 Emission of built-in AF-assist beam
0 : Enabled
1 : Disabled

Table of Contents

Related product manuals