Canon DC DC210 - DISPLAY SETUP; BRIGHTNESS; LANGUAGE

Menu Options Lists
40
Display Setup (LCD Brightness, Language, etc.)
DISPLAY SETUP
Adjusts the brightness of the LCD
screen.
Use the joystick ( ) to adjust the
brightness to your preference.
Changing the brightness of the LCD
screen does not affect that of the
viewfinder or the recordings.
[ON], [ OFF]
When the LCD panel is rotated 180
degrees to face the subject, most screen
displays will disappear and the image
displayed will be as if the subject was
looking at a mirror.
[ON], [ OFF]
When set to [ ON], the camcorder’s
on-screen displays will appear also on the
screen of a connected TV or monitor.
[ DATE], [ TIME], [DATE & TIME],
[ CAMERA DATA]
[ OFF], [ LEVEL(WHT)],
[ LEVEL(GRY)], [ GRID(WHT)],
[GRID(GRY)]
You can display a grid or a horizontal line
at the center of the screen. The markers
are available in white or gray. Use the
markers as a reference to make sure your
subject is framed correctly (vertically and/
or horizontally).
Using the markers will not affect the
recordings on the disc or memory card.
[DEUTSCH], [ENGLISH], [ESPAÑOL],
[FRANÇAIS], [ITALIANO], [POLSKI],
[ ], [TÜRKÇE], [ ],
[ ], [ ], [ ],
[ ], [ ], [ ], [ ],
[]
BRIGHTNESS
LCD MIRROR
TV SCREEN
DATA CODE
( 51)
MARKERS
LANGUAGE
( 26)
ROMAN
A
D121C_NTSC-E.book Page 40 Thursday, January 11, 2007 2:46 PM