97
1. Vertical Position Shooting
To use the vertical shutter button and AE lock button set the vertical con-
trol switch to the ON position (red dot showing).
2. Film Winding Modes
● Single Exposure ( )
The film advances one frame after each picture is taken. After taking a
picture, return the shutter button to the half-pressed position to prepare
for the next exposure.
● Low-Speed Continuous Exposure ( )
Pictures are taken continuously at a rate of up to approx. 3 frames per
second as long as the shutter button is held pressed.
● High-Speed Continuous Exposure ( )
Pictures are taken continuously at a rate of up to approx. 6 frames per
second as long as the shutter button is held pressed.
3. Maximum
Continuous Shooting Speed in Different AF Modes
Additional Information for the EOS-1 N HS Model
Low-speed continuous ( )
High-speed continuous ( )
One-shot AF/Manual
Approx. 3 fps
Approx. 6 fps
AI Servo AF
Approx. 2.5 fps
Approx. 5 fps
• AA-size lithium batteries can only be used with the EOS-1 N combined with a power
Drive Booster E1 that has a “ ”symbol printed on the AE lock button.
Canon recommends that AA-size lithium batteries not be used in this product since its
initial high voltage may cause damage to the product.
00. Part.6 RS (E) (P.81~105) 27-01-2003 12:39 Page 97
To Next Page
