Protocol Settings
6-5
6
Using a NetWare Network (Windows)
Press [Log In]
→
in the Enter Network Password screen, enter the name and password of a user to
whom the browse right is granted.
If the browse right is limited to the specific user, it is necessary to log in to NetWare as a user to whom
the browse right is granted.
Enter a user name prefixed with 'CN='. If the password is not specified, leave [Password] blank.
Select the tree to which the desired print server belongs
→
select the context to which the desired
print server belongs
→
select the desired print server.
For NDS PServer, specify each item on the screen for setting NDS PServer if necessary.
Setting Bindery PServer or RPrinter in the Browse screen:
In the Browse screen, select the file server to which the desired print server belongs.
In the Enter Network Password screen, enter the name and password of a user on the file server.
If the password is not specified, leave [Password] blank.
Select the desired print server.
Specify each item on the screen for setting Bindery PServer if necessary.
Setting NDS PServer or NPrinter using the keyboard on the touch panel display:
In [Tree], enter the name of the tree to which the desired print server belongs
→
in [ Context ],
enter the name of the context to which the desired print server belongs
→
in [Print Server], enter
the name of the desired print server.
For NDS PServer, specify each of the other items if necessary.
☐
☐
☐
●
☐
☐
☐
☐
●
☐
☐
To Next Page
Loading...
