Canon image RUNNER 3245 - Network Environment Setup

Network Environment Setup Procedures
4-2
4
Settings Common to the Network Protocols
Network Environment Setup Procedures
Before using the machine in a network environment, it is necessary to perform the following setup
procedures.
1
Network Cable Connection (See “Connecting the Machine to a Computer or Network,” on p. 4-3.)
Connect the machine to the network using the network cables.
2
Interface Settings (See “Interface Settings,” on p. 4-9.)
Specify the interface settings for communication between the machine and computers on your network. To specify the settings, use:
The machine's control panel
The Remote UI (via a web browser)
•
•
3
Communication Environment Setup (See “Communication Environment Setup,” on p. 4-11.)
Set up the environment for communication between the machine and computers on your network.