Canon image RUNNER 3245 - Enabling the Remote UI

Before You Start the Remote UI
13-4
13
Managing the Machine from a Computer
Enabling the Remote UI
You must use the machine's control panel to enable the Remote UI.
1 Press (Additional Functions) → [System Settings] → [Remote UI].
If the System Manager ID and System Password have already been set, enter the System Manager ID and
System Password using
- (numeric keys) → press (Log In/Out).
If the desired setting is not displayed, press [ ] or [ ] to scroll to the desired setting.
2 Select [On] → select whether to use SSL.
Select [Off ] to disable the Remote UI.
<Use SSL>:
[On]: Allows secured transmission using SSL.
[Off ]: Prohibits secured transmission using SSL.
Any changes made to <Use SSL> are also applied to <Use SSL> in <Use HTTP> in MEAP Settings in System
Settings (from the Additional Functions screen).
3 Press [Done] repeatedly until the Basic Features screen appears.