Touch Panel Display Transition
4-8
4
Settings Common to the Network Protocols
Settings specified from the control panel become effective after the machine is restarted, after the procedure.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON. (See Chapter 1, "Before You Start Using This
Machine," in Troubleshooting.)
If the System Manager ID and password are set, enter them. (See e-Manual > Security.)
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You Start Using This Machine," in
Troubleshooting.
•
•
To Next Page
Loading...
