Canon ImageCLASS D420 - Page 106

Settings from a PC (D460 Only)
7-5
Starting the Remote UI
4
Enter the required data.
The required data differ depending on the
authentication mode you are using.
■For default settings:
①Select [Administrator Mode] or [End-User
Mode].
If you want to change various settings, select
[Administrator Mode]. Selecting [End-User Mode],
you cannot change the settings.
②In case of End-User Mode, enter the User
Name.
■In case that system manager password is
set:
①Select [Administrator Mode] or [End-User
Mode].
If you want to change various settings, select
[Administrator Mode]. Selecting [End-User Mode],
you cannot change the settings.
②Enter the System Manager password or user
name.
5
Click [OK].