Canon ImageCLASS D420 - System Settings

10-5
Machine Settings
Setting Menu
Item Settings Applicable Page
6 SPECIAL MODE Z OFF
ON
–
–
e-Manual
“Maintenance”
SYSTEM SETTINGS
Item Settings Applicable Page
1 SYS. MANAGER INFO e-Manual
“Security”
2 SYSTEM PASSWORD Seven digits
2 DEVICE INFO
1 DEVICE NAME Maximum 32 characters
2 LOCATION Maximum 32 characters
3 NETWORK SETTINGS* e-Manual
“Network Settings (D460
Only)”
1 TCP/IP SETTINGS
1 IPv4 SETTINGS
1 IP ADDRESS AUTO.
ON DHCP (ON/OFF)
BOOTP (OFF/ON)
RARP (OFF/ON)
–
–
–
OFF
2 IP ADDRSSS IP address (000.000.000.000)
3 SUBNET MASK (000.000.000.000)
4 GATEWAY ADDRESS IP address (000.000.000.000)
5 SET IP ADD RANGE
OFF
ON
1 IP ADDRESS 1
1 PERMIT/REJECT REJECT
PERMIT
–
–
2 START IP
ADDRESS
IP address (000.000.000.000)
3 END IP ADDRESS IP address (000.000.000.000)
2 IP ADDRESS 2
1 PERMIT/REJECT REJECT
PERMIT
–
–
2 START IP
ADDRESS
IP address (000.000.000.000)
3 END IP ADDRESS IP address (000.000.000.000)