9-15
Troubleshooting
Clearing Jams
15
Close the rear cover.
This operation is required only when <PAPER
JAM/OPEN REAR COVER> appears on the
display.
Be careful not to get your fingers caught.
To reset the machine, open the toner cover and
then close it.
16
Load the paper into the paper feeding
tray.
17
Set the dust cover on the paper feeding
tray.
After all the procedures are complete, the
machine should be ready for operating. If the
machine returns to the standby mode,
troubleshooting has been successful. If the
machine does not return to the standby mode,
check if jammed paper is still left in the machine.
To Next Page
Loading...
