Canon imagePRESS Server M10 - Specifications; Hardware Features; Physical and Compliance Specifications

Specifications
The imagePRESS Server has, or makes use of, the following features.
Hardware features
Item Content
Print Resolution 1200 dpi x 1200 dpi, 600 dpi x 600 dpi
Page Description Language(s) Adobe PS3,PCL6
Memory 4GB (1x4GB)
Hard Disk Drive 500 GB SATA
Processor Speed Intel Pentium G4400 (3.3GHz)
System FS350
Fonts PS:138 Fonts
PCL:113 Fonts
Supported Operating Systems
Windows 7 64 bit /
Windows 8.1 64 bit /
Windows10 64 bit /
Windows Server 2012 64bit only /
Windows Server 2012 R2 64bit only /
Windows Server 2016 R2 64bit only /
Windows Server 2019 64bit only /
MAC OS (10.11, 10.12, 10.13, 10.14)
Interface 2 x Ethernet (1000Base-T/100Base-TX/10Base-T)
4 Rear Ports USB2.0
2 Rear Ports USB3.0
Network protocols TCP/IP (FTP, SMTP, POP, HTTP, SNMP, LDAP, SLP, SMB, LPD, IPP, WS-Discovery,
Bonjour, Direct Mobile Printing, Port9100, SNTP, 802.1X, DHCP, DNS, NTP)
Direct Print format PDF1.7, EPS, TIFF6, JDF1.4/JMF(OP)
VDP FreeForm v1, v2.1
Fiery Print Controller Standard Features
Fiery Command WorkStation6 / Paper Catalog / Fiery Spot-On / Fiery Re-
mote Scan / Fiery Hot Folders&Virtual Printers
Fiery Print Controller Options
Fiery Impose / Fiery Compose / Fiery Impose and Compose / Productivity
Package Web Activate (Include Fiery JDF)
HW Platform E400
Base OS Debian of Linux
Actual Power consumption while printing 47W
100-240V, 50/60Hz, 3.0A or 3.0-1.3A
Dimensions (W x D x H)(mm) 285 × 93 × 295
Weight Fiery unit only(w/ plate):4.95Kg
Fiery+Accessory:5.6Kg(12.3lbs)
Shipping wight : 10.4Kg (23.0lbs)
Physical specifications
• Operating Environment:
Temperature: +10°C to +40°C
Relative Humidity: 10%-85% (non-condensing)
• Power Supply Rating: 100 -240V, 50-60Hz, 2-4A
Safety and emissions compliance
The imagePRESS Server has been certified to meet or surpass the following standards:
1. Introduction
7