Canon imagePRESS Server M10 - Specifications; Safety and EMI;EMC Approvals; System Software and Password Information

■ Safety approvals
• IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am2:2013
• UL 60950-1:2007 R10.14 (TUV NRTL)
• CAN/CSA C22.2 No. 60950-1:2007 +A1:2011 +A2:2014 (TUV NRTL)
• GS Mark by TUV, EN60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
• EAC - Republic of Belarus, Republic of Kazakhstan, Tajikistan, Kyrgyzstan and Armenia (TBD)
• CCC - China
■ EMI/EMC approvals
• FCC Title 47, Part 15 Subpart B, Class B-NA
• ICES-003, Issue 5, August 2012, Class B-NA
• VCCI-CISPR32 Class B, Japan
• EN55032:2012/AC:2013, Class A, EU
• EN55024:2010 (EU)
• AS/NZS CISPR 32:2012/AC:2013, Class B
• EN61000-3-2:2014
• EN61000-3-3:2013
• EAC - Republic of Belarus, Republic of Kazakhstan, Tajikistan, Kyrgyzstan and Armenia
• CCC - China
System Software
Item Ver.
System Software Fiery System
1.0.1
User Software
Item Ver.
PS PrinterDriver
6.2.005.0
[Win/Mac] PPD File
2019.0620
[Win] Job Properties
3.3.0.027
[Mac X] Job Properties
3.2.0.027
[Win/Mac] Impose/Compose
5.00.0.021
[Win/Mac] Command WorkStation
6.3.00.54
[Win/Mac] Fiery Remote Scan
6.7.0.20
[Win/Mac] Hot Folder
3.12.0.32
[Win] EFI Printer Delete Utility
3.4.0.08
[Mac] Fiery Software Uninstaller
1.9.0.08
Checking the Service Mode of Connection Engine
When connecting imagePRESS Server, it is necessary to select the engine service mode COPIER > OPTION > INT-FACE >
IMG-CONT to ”3”.
When the controller is connected, the automatically recognized value is displayed in the following service mode.
COPIER > OPTION > INT-FACE > CNT-TYPE > xxx
CNT-TYPE Model
471 imagePRESS Server M10
How to obtain the Fiery password
To log on to the Fiery server as an administrator or operator, you must obtain the Fiery password.
1. Introduction
8