• Fiery System Settings
• Color Settings
• Scan Settings
• FreeForm/VDP Resources
• Virtual Printers
• Server Presets
• Fonts
• Job Log
NOTE:
If you cannot create a configuration file as described in the following procedure, ask the site administrator to archive custom files
(such as color profiles and customer-installed fonts) to removable media or a network location.
Configuration settings not available
for backup in Configure
Alternate procedure
Fiery System Settings
• Current date and time (but the date
and time are indicated by timestamp
on the configuration file)
• Address books
Alternate procedure none: Set it after a restore in the current date and time of the day.
Color Settings
• 2-color print mapping
• Added Calibration settings
Alternate procedure none: 2-color print mapping
http://help.efi.com/cws/6.0/en-us/GUID-DEE38FC8-EB93-41E9-
AD21-24E4B333AE2A.html
Alternate procedure none: Edit a calibration setting
http://help.efi.com/cws/6.0/en-us/GUID-C4B15CC7-
F1C9-439A-8E9E-4296FB304C3C.html
Job Log In Configure, Select Job Log to specify how the Job Log is automatically exported.
Paper Catalog Export Paper Catalog in Command WorkStation
http://help.efi.com/cws/6.0/en-us/GUID-DEE38FC8-EB93-41E9-
AD21-24E4B333AE2A.html
NOTE:
Only an Administrator can access Paper Catalog Setup.
1. Click the Export icon and choose Export All If you want to export only some of the
media entries, you can select multiple entries in the Export Selected. You can Shiftclick
to select sequential entries, or Ctrl-click to select nonsequential entries.
2. Navigate to a location on your computer or network where you want to save the ex-
ported database file.
3. Enter a name for the database file, and then click Save.
Saved jobs in Hold queue To backup these jobs, archive the jobs from the Hold queue.
Saved jobs in Printed queue To backup these jobs, archive the jobs from the Printed queue.
Job settings To save these settings, create a Job Properties local preset and back it up to external media.
● To back up the system configuration
1. Ask the site administrator to print the Job Log, Configuration page, and Font List (if possible). For more information,
see “To print the Configuration pages” on page 66.
2. Connect your computer to the same network as the imagePRESS Server, and open a Web browser window.
NOTE:
Request the permission from the network administrator before you connect your computer to the network.
3. In the URL field of the browser, type the IP address or server name of the imagePRESS Server, and press Enter to
access WebTools.
The IP address and server name are listed on the Configuration page.
4. In WebTools, click the Configure tab.
4. INSTALLING SYSTEM SOFTWARE
47
To Next Page
Loading...