Handling rolls
• If paper from a roll is jammed by the Paper Feed Slot
1. Open the Roll Paper Unit Cover .
2. Remove the jammed paper from the Paper Feed Slot .
After removing the paper , make sure there are no other scraps of paper in the printer . If paper
is jammed deep in the Paper Feed Slot (→P .141) , remove the Roll Feed Unit and clear the
paper jam.
• If the paper is jammed by the Ejection Guide
Remove the jammed paper from the Output T ray .
After removing the paper , make sure there are no other scraps of paper in the printer .
4. Press OK .
140 Handling Paper
To Next Page
Loading...
