Printing enlargements or reductions
12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attribute dialog box-in this case, ISO A4 .
13. Select the D Enlarged/Reduced Printing check box.
14. Click G Scaling and enter “120.”
Note
• Y ou can specify enlargement that exceeds the paper size, but in this case, the portion of f the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner . In this case, you can center originals by selecting the J Print Centered
check box.
15. Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P .493)
256 Enhanced Printing Options
To Next Page
Loading...
Need help?
General