Other Maintenance
7. Open the Ink T ank Lock Lever and remove every Ink T ank .
Put the Ink T ank in a plastic bag and seal it.
Note
• Store the Ink T ank you removed with the ink holes (a) facing up. Otherwise, ink may leak and
cause stains.
8. Close every Ink T ank Lock Lever , and close the Ink T ank Cover .
At this point, ink is drawn out from inside the tubes.
Important
• Do not remove the Maintenance Cartridge during this process.
When the suction is nished, T urn Power Off!! is displayed.
Maintenance 649
To Next Page
Loading...
