Messages regarding ink
Ink insufcient.
Cause Corrective Action
The ink level is low , so you cannot clean the
Printhead .
Press the OK button and replace the Ink T ank that is
low with a new Ink T ank .
( → P .614)
The ink level is low , so there may not be enough ink
to nish printing.
Press the OK button and replace the Ink T ank that is
low with a new Ink T ank .
( → P .614)
Y ou can print until the ink runs out by pressing the
Online button. However , if the ink runs out during
printing, the following situation will occur depending
on the position of the leading edge when it passes
through the printer .
1. Ink tank is empty . is displayed and printing
stops. Press the Stop button to cancel printing,
or press the OK button, replace the ink tank that
is low with a new one, and continue printing.
However , note that because printing is paused,
colors may be slightly dif ferent. ( → P .614)
2. Ink tank empty . Canceling printing of this
page. is displayed and printing stops. After the
paper is ejected, press the OK button and replace
the ink tank that is low with a new one. ( → P .614)
702 Error Message
To Next Page
Loading...
Need help?
General