Printer Specications
Paper (*1)
Paper width 250-610 mm (9.8-24 in)
T ray (top) 1,600 mm (63.0 in)Sheets
T ray (front) 914 mm (36.0 in)
Maximum
length per
page
Rolls 18 m (19.7 yd.)
T ray (top) 0.08-0.8 mm (0.003-0.031 in)Sheets
T ray (front) 0.8-1.5 mm (0.031-0.060 in)
Thickness
Rolls 0.08-0.8 mm (0.003-0.031 in)
Supported
sizes
ISO A1, ISO A2, ISO A2+, ISO A3, ISO A3+, ISO A4, ISO B2,
ISO B3, ISO B4, JIS B2, JIS B3, JIS B4, 22"x34" (ANSI D),
17"x22" (ANSI C), 1 1"x17" (Ledger), 13"x19" (SuperB), Letter
(8.5"x1 1"), Legal (8.5"x14"), 24"x36" (ARCH D), 18"x24"
(ARCH C), 12"x18" (ARCH B), 9"x12" (ARCH A), DIN C2,
DIN C3, DIN C4, 20"x24", 18"x22", 14"x17", 12"x16", 10"x12",
10"x15", 8"x10", US Photo 16"x20", Poster 20"x30", 13"x22",
Poster 300x900 mm
T ray (top)
• Width: 203-610 mm (8-24 in)
• Length: 279-1,600 mm (1 1-63 in)
Sheets
T ray (front)
• Width: 250-610 mm (8-24 in)
• Length: 350-914 mm (14-36 in)
Paper size
Rolls 8 inches (203 mm), 10 inches (254 mm), JIS B4 (257 mm),
ISO A3/A4 (297 mm), Banner (300 mm), A3+ (329 mm), 14
inches (356 mm), 16 inches (407 mm), ISO A2/A3 (420 mm),
17 inches (432 mm), JIS B2/B3 (515 mm), ISO A1/A2 (594
mm), 24 inches (610 mm)
Normal size Printable area
• Sheets ( T op Paper Feed Slot )
T op: 3 mm (0.12 in); bottom: 3 or 23 mm (0.9 in); left and
right sides: 3 mm. (The bottom value varies depending
on the type of paper .)
• Sheets ( Front Paper Feed Slot )
3 mm (0.12 in) on top, 23 mm (0.9 in) on bottom, and 3
mm (0.12 in) on both sides
• Rolls
3 mm (0.12 in) from each side
For information on the recommended print area, see “Print
Area”. (→P .78)
Borderless printing (*2) Printable area (rolls)
Entire surface
Print area
Oversized (*2), (*3) Printable area
Entire surface
Supported width for borderless printing 10 inches (254 mm), JIS B4 (257 mm), A3+ (329 mm), 14
inches (356 mm), 16 inches (407 mm), ISO A2/A3 (420 mm)
(*4), 17 inches (432 mm), JIS B2/B3 (515 mm), ISO A1/A2
(594 mm) (*4), 24 inches (610 mm)
Printer Parts 75
To Next Page
Loading...
Need help?
General