Cause Corrective Action
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Depending on the type of paper, printed
lines may be noticeably misaligned.
Specify Proof in Print Priority in the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →User's Guide
Borders appear during borderless printing
Borders appear during borderless printing
Cause Corrective Action
When executing borderless printing on A1 (594 mm)
or A2 (420 mm) rolls, the Spacer for Borderless Print-
ing was not attached to the Roll Holder.
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included
Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.") →P.9
The paper selected for borderless printing at actual
size was wider than the actual page size.
For borderless printing at actual size, use roll paper that has the same width as
the actual page size.
(See "Borderless Printing at Actual Size.") →User's Guide
There are spaces (margins) on the document. Make sure there are no register marks or transparent objects on the document.
Your application is configured to include spaces (mar-
gins).
Check to see if your application is configured to include spaces (margins).
BordlessOversize is set to Little on the Control Pan-
el menu.
Set BordlessOversize to Standard on the Control Panel menu.
(See "Menu Settings.") →User's Guide
iPF6400
Borders appear during borderless printing
Basic Guide
Troubleshooting Problems with the printing quality
111
To Next Page
Loading...
Need help?
General
