4
Close the Top Cover.
5
If any options are attached to the printer, remove them from the printer and pack them.
6
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
7
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.
Reinstalling the Printer
Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
Assemble the stand (optional)
1
If you are using the optional Stand, assemble the
Stand by referring to the Printer Stand Setup Guide
included with the Stand.
Caution
• The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself poses
a risk of injury or bending the Stand.
• When assembling the Stand, lock the casters. In addition, always unlock the casters before moving the as-
sembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or damage to
the location site.
Reinstalling the Printer
iPF6400
Basic Guide
Printer Relocation Preparing to Transfer the Printer
70
To Next Page
Loading...
