Canon imagePROGRAF iPF6400 Basic Guide

4 Press ▲ or ▼ to select "Yes", and then press the OK button.
The paper is ejected from the front of the printer.
Important
• If the trailing edge of a sheet is not ejected, pull the sheet out, keeping the front edge level. Accidentally re-
moving the sheet at an angle may scratch the printed surface.
Removing heavyweight sheets from the front paper feed slot
1
On the Tab Selection screen of the Control Panel, press ◀ or
▶ to select the Paper tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2 Press the OK button.
The Paper Menu is displayed.
3 Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4 Press ▲ or ▼ to select "Yes", and then press the OK button.
As the printer ejects the paper, the paper is stopped momentarily with the trailing edge still held in the roll-
ers.
5 Press the OK button.
The sheet can now be removed.
6
Remove the sheet, keeping the front edge level as
you pull it out.
Important
• If POP Board is accidentally removed at an angle, it may scratch the printed surface.
7 Press the OK button.
Important
• Always remove the sheet before pressing the OK button. If you do not remove the sheet before step 7, it may
go back inside the printer, leaving roller marks across the trailing edge of paper.
Removing Sheets iPF6400
Basic Guide
Handling Paper Handling sheets
24

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0