Canon imagePROGRAF iPF6400 Basic Guide

10
Push the Printhead Fixer Lever toward the back of
the printer until it clicks.
11
Close the Top Cover.
Ink now fills the system. It takes about 11 minutes
for ink to fill the system.
Important
• Never remove an Ink Tank while the system is filling with ink.
Note
• The procedure is now finished if you have set Rep.P.head Print to Off in the Control Panel menu.
In this case, execute the Initial adjustmt of Head Posi. Adj. from the Control Panel menu.
(See "Adjustment When Installing the Printhead.")
→User's Guide
12 Follow the instructions on the Display Screen to advance the paper.
After the paper is advanced the Initial adjustmt of Head Posi. Adj. will be executed automatically.
Note
• When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the
optimal Printhead height before aligning the printhead.
(See "Enhancing Printing Quality.")
→User's Guide
iPF6400 Replacing the Printhead
Basic Guide
Consumables and Maintenance Printheads
39

Canon imagePROGRAF iPF6400 Specifications

General

Color	Yes
Printing colors	Black, Blue, Cyan, Green, Grey, Magenta, Matte black, Photo cyan, Photo grey, Photo magenta, Red, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Maximum print size	-
Maximum roll length	18 m
ISO A-series sizes (A0...A9)	A1, A2
ISO B-series sizes (B0...B9)	B2
Internal memory	384 MB
Sound pressure level (printing)	47 dB
Power supply	100 W
Power consumption (off)	5 W
Power consumption (standby)	6 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
USB port	No
USB 2.0 ports quantity	0