Chapter 1
1-39
[Adjust Printer]
T-1-22
Setting Item Description/Instructions
[Auto Head Adj.] [Standard Adj.] Choose Yes to have the printer print and read a test pattern for the automatic adjustment of
Printhead alignment relative to the printing direction.
[Advanced Adj.] Choose Yes to have the printer print and read a test pattern for the automatic adjustment of
Printhead alignment relative to the nozzle and printing direction.
[Auto Print] Choose On to have the printer automatically execute the Advanced Adj. operations after you
replace the Printhead.
[Manual Head Ad] Choose Yes to print a test pattern for adjustment of Printhead alignment relative to the printing
direction. Enter the adjustment value manually based on the resulting pattern.
[Auto Band Adj.] [Standard Adj.] Choose Yes to have the printer print and read a band adjustment test pattern for automatic
adjustment of the feed amount.
[Advanced Adj.] Choose this option when using paper other than genuine Canon paper, or paper for purposes
other than checking output.
Choose Yes to have the printer print and read a band adjustment test pattern for automatic
adjustment of the feed amount. Note that this function takes more time and requires more ink
than Standard Adj.
[Manual Head Adj] Choose Yes to print a test pattern for adjustment of Printhead alignment relative to the printing
direction. Enter the adjustment value manually based on the resulting pattern.
[Adjust Length] [A:High] Choose Yes to print a test pattern for adjustment relative to paper stretching or shrinkage, after
which you can enter the amount of adjustment.
[B:Standard/Draft]
[Head Inc. Adj.] Select [Yes] to print an adjustment pattern for adjusting the inclination of the printhead.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
