Canon iP4500 - LF Correction Value; Eject Correction Value

20
3-1) LF correction value
Selected pattern number Number of times the Resume/Cancel button is pressed (M)
1 (A) 1 time
0 (B) 0 times
2 (C) 2 times
Note: - Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green.
- If the Resume/Cancel button is pressed 3 times or more, then the Power button is
pressed, the printer returns to the service mode menu selection.
3-2) Eject correction value
Selected pattern number Number of times the Resume/Cancel button is pressed (N)
1 (A) 1 time
0 (B) 0 times
2 (C) 2 times
Note: - Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green.
- If the Resume/Cancel button is pressed 3 times or more, then the Power button is
pressed, the printer returns to the service mode menu selection.
4) The selected LF correction value or Eject correction value is written to the EEPROM, and the flag
for the E-MIP correction value becomes OFF, enabling the LF / Eject correction values written to
the EEPROM. Then, the flag for the fixed value of the endurance correction becomes ON, and the
machine returns to the service mode menu selection.