Canon iPF600 series - 8.4 Sevice Call Table

Chapter 8
8-3
8.4 Sevice Call Table
8.4.1 Service call errors
0013-2081
*Codes correspond to the numbers shown on the DIPLAY in the service mode.
T-8-4
03810202-2582 Remaining ink low (M)
03810202-2592 Remaining ink low (M)
03810203-2583 Remaining ink low (C)
03810203-2593 Remaining ink low (C)
03810204-2580 Remaining ink low (BK)
03810204-2590 Remaining ink low (BK)
03810206-2586 Remaining ink low (MBK)
03810206-2587 Remaining ink low (MBK2)
03810206-2596 Remaining ink low (MBK)
03810206-2597 Remaining ink low (MBK2)
03830101-2521 Ink tank not installed (Y)
03830102-2522 Ink tank not installed (M)
03830103-2523 Ink tank not installed (C)
03830104-2520 Ink tank not installed (BK)
03830106-2526 Ink tank not installed (MBK)
03830106-2527 Ink tank not installed (MBK2)
03830201-2541 Ink tank ID error (Y)
03830202-2542 Ink tank ID error (M)
03830203-2543 Ink tank ID error (C)
03830204-2540 Ink tank ID error (BK)
03830206-2546 Ink tank ID error (MBK)
03830206-2547 Ink tank ID error (MBK2)
03830301-2561 Ink tank EEPROM error (Y)
03830302-2562 Ink tank EEPROM error (M)
03830303-2563 Ink tank EEPROM error (C)
03830303-2572 Remaining ink low (M)
03830304-2560 Ink tank EEPROM error (BK)
03830304-2570 Remaining ink low (BK)
03830306-2566 Ink tank EEPROM error (MBK)
03830306-2567 Ink tank EEPROM error (MBK2)
03830306-2576 Remaining ink low (MBK)
03830306-2577 Remaining ink low (MBK2)
03830312-2571 Remaining ink low (Y)
03830313-2573 Remaining ink low (C)
03841001-2819 Maintenance cartridge tank full
03841001-281B Empty capacity of the maintenance cartridge when cleaning it various is insufficient.
03841101-2818 Maintenance cartridge not installed
03841201-2816 Maintenance cartridge EEPROM error
03841201-2817 Maintenance cartridge ID error
03860002-2E0A Manually fed cut sheet was already loaded even though received data indicated roll media
03861001-2405 The form set position is unsuitable to the print of edge none.
03861001-2406 Data is unsuitable to the print of edge none.
03862000-2E09 Roll paper running out
03870001-2015 Cut error
E194-4034 Sensor calibration error(not generated in the user mode. )
Code* Description
E141-4046 Recovery system rotation count reached 50,000.
E144-4047 Feed system counting error
E146-4001 Borderless/idle ejection/mist recovery count full
E161-403E Abnormally high printhead temperature
E194-404A No ink ejection counting error
E196-4040 Checksum error
E196-4041 Flash memory clearing error
E196-4042 Flash memory write error
E196-4043 Main controller error
E196-4045 EEPROM write error
E196-4049 Forwarding ROM data machine kind difference
E198-401C RTC error
Code* Description