Canon iPF600 series - Installing the Stand

Chapter 3
3-9
3.1.2.2 Installing the Stand
0013-4404
Stand assembly requires two or more people.
a. Package Contents
F-3-31
T-3-1
b. Assembling the Stand
(1) Position the Stand L [1] and Stand R [2] so that the "L" and "R" marks are on the outside toward the front.
F-3-32
(2) Holding the Stand Stay [1] with the rear side (identified by an "R" sticker) facing back, insert it fully into the grooves of the Stand L [2] and Stand R [3] until
it stops.
[1] Stand L [12] Basket Cloth
[2] Stand R [13] Basket Rod #2
[3] Stand Stay [14] Basket Rod Caps (2pcs.)
[4] Table Stay [15] Basket Wire #2
[5] Table Stay Bolt [16] Basket Band, preinstalled
[6] Table Bolts (6pcs.) [17] Basket Bolts (2pcs.)
[7] Printer Securing Bolts (4pcs.) [18] Basket Decorative Nuts (2pcs.)
[8] Accessory Box [19] Basket Rod #3
[9] Velcro Tape [20] Basket Fastener A (2pcs.)
[10] Basket Table [21] Wrench
[11] Basket Rod #1 (2pcs.) [22] Allen Wrench
[1] [3][2]
[7]
[5][4]
[11] [13] [14]
[6]
[10]
[8] [9]
[12]
[15]
[19] [21][18][17]
[16]
[22][20]
[1]
[2]