List of Error Messages
3-7
Troubleshooting
3
# 037
Cause Documents could not be received because there was insufficient memory available.
Remedy Erase unnecessary documents and documents with errors from memory to increase the
amount of available memory.
#099
Cause Copying/printing was interrupted.
Remedy Try copying/printing again.
# 701
Cause 1 The specified Department ID does not exist, or the password has changed.
Remedy Enter the correct Department ID or password using - (numeric keys) on the control
panel, and try again.
Cause 2 The Department ID or password was changed while the machine was processing a job, or
<Allow Printer Jobs with Unknown IDs> is set to 'Off'.
Remedy Contact your System Manager.
# 703
Cause The hard disk is full, and no more images can be scanned.
Remedy 1 Wait a few moments, and try scanning again after other send jobs are complete.
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate normally, turn the
main power OFF, and then back ON again.
# 711
Cause The inbox memory is full.
Remedy Erase the unnecessary documents stored in the inbox.
# 712
Cause The maximum number of documents are already stored in the inbox.
Remedy Erase the unnecessary documents stored in the inbox.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
