List of Error Messages
3-13
Troubleshooting
3
# 860
Cause 1 A paper jam occurred during printing.
Remedy Try printing again.
Cause 2 Recovery printing was not performed.
Remedy Try printing again.
Cause 3 You tried to print on a transparency sheet made for color copies.
Remedy Load transparencies made for black-and-white copies into the machine and then try printing
again.
# 861
Cause 1 An error occurred while processing PDL data or image data.
Remedy Confirm the print settings you made when printing from a computer.
Cause 2 Color data was sent from the external controller to the billing device as monochrome data.
Remedy Change the print data or print settings, and try printing again.
# 862
Cause 1 The saddle finisher trays have exceeded their stacking limits. (See Chapter 9, Appendix, in
the Reference Guide.)
Remedy Change the print data or print settings, and try printing again.
Cause 2 A combination of settings which is not supported was set.
Remedy Change the print data or print settings, and try printing again.
Cause 3 Image data or data which is not guaranteed to be compatible was printed.
Remedy Change the print data or print settings, and try printing again.
Downloaded from ManualsPrinter.com Manuals
To Next Page
