Canon LBP712Cx - Unit of Measurement

( ) <PCL> <Custom Size> <Set> or <Do Not Set>
Unit of Measurement
*
Enables you to specify the unit of measurement you would like to use to specify your custom paper size.
Millimeters
Inches
( ) <PCL> <Unit of Measurement> <Millimeters> or <Inches>
X Dimension
*
Enables you to specify the X dimension of the custom paper. The X dimension can be adjusted between 76.2 mm and
215.9 mm in increments of 0.1 mm.
76.2 to 215.9 mm
( ) <PCL> <X Dimension> Use the numeric keys to enter the setting
value
Y Dimension
*
Enables you to specify the Y dimension of the custom paper. The Y dimension can be adjusted between 127.0 mm and
355.6 mm in increments of 0.1 mm.
127.0 to 355.6 mm
( ) <PCL> <Y Dimension> Use the numeric keys to enter the setting
value
Setting Menu List
443