3
Load the paper so that the edge of the paper stack is aligned against the paper guide
on the left side of the paper drawer.
● Insert the paper with the print side face up.
● Fan the paper stack well, and tap it on a at surface to align the edges.
Do not exceed the load limit line when loading paper
● Make sure that the paper stack does not exceed the load limit line (
). Loading too much paper can
cause paper jams.
● When loading paper with a logo, see Loading Preprinted Paper(P. 53) .
4
Set the paper drawer.
»
Continue to Specifying Paper Size and Type in the Paper Drawer(P. 58)
When changing the paper size or type
Basic Operations
41
To Next Page
Loading...
