Canon LBP712Cx - Installing the System Options;MEAP Applications

The procedures to install the system options or MEAP applications on the printer differ, depending on
whether the printer is connected or not to an outside network. Select the procedure that matches your
conditions using the references below.
Installing by Connecting this Printer to an Outside Network
Install from the Remote UI.
Installing by Not Connecting this Printer to an Outside Network
Installing System Options
Install using one of the following procedures.
Installing MEAP Applications
Use the following procedure to install.
NOTE
Communication test
To check that the transmission with the delivery server is properly operating, if necessary, perform a
communication test before installation.
"Testing Communication Using the Remote UI"
NOTE
If you install multiple system options
We recommend that you install from the Remote UI.
Procedure Necessary Steps Reference Page
Using the Remote UI
to install
1
.
Obtain the license file from the
License Managemen
t
System
"Obtaining the License File"
2
.
Install the license file using the
Remote UI
"Installing the System
Options Using the Remote
UI"
Procedure Necessary Steps Reference Page
Using the Remote UI
to install
1
.
Obtain the license file from the
License Managemen
t
System
"Obtaining the License File"
2
.
Install the license file and
application file using the
Remote U
I
"Installing the MEAP
Applications Using the
Remote UI"
3
.
Start the MEAP applications
f
rom SMS
"Starting the MEAP
Applications"
Installing the System Options/MEAP Applications
1