Canon MVX300 User Manual

153
Additional Information
E
Memory Card Operation
Printing
Problem Cause Solution
Memory card cannot be
inserted.
Memory card was not facing
the correct direction.
Turn the memory card over
and reinsert it.
90
Memory card cannot be
recorded.
Memory card is full. Replace the memory card or
erase images.
90
Memory card is not formatted. Format the memory card.
117
Memory card is not inserted. Insert a memory card.
90
File number reached
maximum value.
Set [FILE NOS.] to [RESET]
in the menu and insert a new
memory card.
93
SD Memory Card is
protected.
Change the position of the
protect switch.
90
Memory card cannot be
played back.
Camcorder is not set to
CARD PLAY mode.
Set the camcorder to CARD
PLAY mode.
109
Memory card is not inserted. Insert a memory card.
90
Image cannot be erased. Image is protected. Cancel the protection.
111
SD memory card is protected. Change the position of the
protect switch.
90
“ ” flashes red. Card error occurred. Turn off the camcorder.
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.
117
Problem Cause Solution
The printer is not operating
even though camcorder and
printer are correctly
connected.
The camcorder is set to
NETWORK mode.
1. Set the camcorder to
CARD PLAY mode.
2. Disconnect and reconnect
the USB cable.
3. Turn off the printer and turn
it back on.
–

Canon MVX300 Specifications

General

Brand	Canon
Model	MVX300
Category	Camcorder
Language	English