transmission, re-transmission of the procedure
signal has been attempted the number of
specified times but failed.
- Increase the transmission level of the
receiving machine.
##765 TX After transmitting PPS-EOP in ECM
transmission, no significant signal has been
received, and re-transmission of the procedure
signal has been attempted the number of
specified times but failed.
- Try a higher transmission level.
- Increase the transmission level of the
receiving machine.
##767 TX After transmitting PPS-EOP in ECM
transmission, DCN has been received.
- Try a higher transmission level.
##768 TX After transmitting PPS-EOP in ECM
transmission, re-transmission of the procedure
signal has been attempted the number of
specified times but failed, or T5 time-over (60
sec.) has occurred.
- Increase the period of time of the T5
time-over.
##769 TX After transmitting PPS-EOP in ECM
transmission, re-transmission of the procedure
signal has been attempted the number of
specified times but failed.
- Try a higher transmission level.
- Increase the transmission level of the
receiving machine.
##770 TX After transmitting EOR-NULL in ECM
transmission, no significant signal has been
received, and re-transmission of the procedure
signal has been attempted the number of
specified times but failed.
- Try a higher transmission level.
- Increase the transmission level of the
receiving machine.
##772 TX After transmitting EOR-NULL in ECM
transmission, DCN has been received.
- Try a higher transmission level.
##773 TX After transmitting EOR-NULL in ECM
transmission, re-transmission of the procedure
signal has been attempted the number of
specified times but failed, or T5 time-over (60
sec.) has occurred.
- Increase the period of time of the T5
time-over.
##774 TX After transmitting EOR-NULL in ECM
transmission, ERR has been received.
- Try a higher transmission level.
##775 TX After transmitting EOR-MPS in ECM
transmission, no significant signal has been
received, and re-transmission of the procedure
signal has been attempted the number of
specified times but failed.
- Try a higher transmission level.
##777 TX After transmitting EOR-MPS in ECM
transmission, DCN has been received.
- Try a higher transmission level.
##778 TX After transmitting EOR-MPS in ECM
transmission, re-transmission of the procedure
signal has been attempted the number of
specified times but failed, or T5 time-over (60
- Increase the period of time of the T5
time-over.
To Next Page
Loading...
