Canon Oce PlotWave 500 - Passwords Policy and Behaviour in the Océ Plotwave 345;365 and Océ Plotwave 450;550

Passwords policy and behaviour in the Océ PlotWave 345/365 and Océ
PlotWave 450/550
Introduction
There are 2 groups of passwords:
• The passwords used in Océ Express WebTools
• The passwords used on the printer user panel
Passwords used in Océ Express WebTools
In Océ Express WebTools the passwords protect:
• The roles
• Name of the user of an external location
• The Proxy authentication passwords
• The security settings (preshared key for IPsec)
Password policy
• 256 characters maximum
• all MS Windows characters are allowed
Passwords used on the user panel
The following settings are protected by the System administrator or Power user password on the
user panel:
• The network settings
• The security settings
• The system update
The following devices, settings and functions are protected by the Key operator or Power user
password on the user panel:
• 'Clear system'
• The scanner
• The print density
• The Finishing device
• 'Clean the knife' (folder option)
NOTE
Keep this password. The reset of this password may require the intervention of a Service
technician.
Passwords modification
Password modification table for Océ PlotWave 345/365 and Océ PlotWave 450/550
Password for/to
Can be changed by
Key operator Key operator or Power user
System administrator System administrator or Power user
Power user Power user
User name of external locations System administrator or Power user
Any preshared key for IPsec System administrator or Power user
4
Passwords policy and behaviour in the Océ PlotWave 345/365 and Océ PlotWave 450/550
162
Chapter 4 - Security on Océ PlotWave 345/365 and Océ PlotWave 450/550